16 ports 10/100, 1000Base-T (M12 femelle, PoE+ IEEE802.3af/at)
4*10/100/1000Base-T (M12 femelle) + 4*10/100/1000Base-T (M12 femelle, bypass), commutateur Ethernet industriel géré, indice de protection IP40, montage sur bureau ou en rack, entrée 77-138 VCC
Le Visonicom SMP3124-16PGE8GE-I-DC est un commutateur Ethernet industriel M12 de couche 2 géré offrant 24 ports Gigabit Ethernet. Les 16 premiers ports Ethernet M12 femelles prennent en charge le PoE et fournissent une puissance de sortie maximale de 30 W par port. Il prend en charge de nombreuses fonctionnalités de couche 2 telles que les VLAN, STP/RSTP/MSTP, ERPS, QoS, ACL, ainsi que la gestion via Web/CLI et la gestion SNMP par des solutions tierces. Il est doté d’un boîtier métallique robuste et étanche, avec un indice de protection IP40, et répond aux exigences de compatibilité électromagnétique (CEM) de niveau industriel 4. Le produit prend en charge une large plage de tension d’alimentation de 77 à 138 V CC et une large plage de températures de fonctionnement allant de -40 à +85 °C. Outre ses dimensions compactes permettant une installation peu encombrante, chaque produit a passé avec succès un test de vieillissement à 100 % dans un laboratoire d’essai à 85 °C afin de garantir une transmission de haute fiabilité. Toutes ces caractéristiques font de ce produit la solution idéale pour les applications nécessitant une transmission hautement fiable, telles que la vidéosurveillance, les systèmes de péage, les systèmes de transport intelligents (ITS) et l’automatisation industrielle, ou encore dans des environnements particulièrement hostiles, où un réseau extrêmement stable, résistant et durable est indispensable.
Caractéristiques de base
- Plage de température de fonctionnement de -40 à 85 °C
- Indice de protection IP40 avec boîtier métallique robuste
- Conception sans ventilateur
- Protection CEM de niveau 4
- PoE+, IEEE802.3af/at
- ERPS avec temps de commutation de protection <20 ms
- Prise en charge du bypass
- Fonctionnalités de couche 2 telles que VLAN, STP/RSTP/MSTP, ERPS, QoS, ACL
- Gestion via Web/CLI et gestion SNMP tierce.
- Gestion via Web, Telnet et console
Caractéristiques techniques :
| Model No. | SMP3124-16PGE8GE-I-DC |
| Standard | IEEE 802.3 10Base-T |
| IEEE 802.3u 100Base-Tx | |
| IEEE 802.3ab 1000Base-T | |
| Switch Properties | MAC Table: 8K |
| Packet Buffer: 4M | |
| VLAN: 4K | |
| VLAN Mode: Acess/Trunk/Hybrid | |
| 802.1Q/port/protocol/MAC/IP subnet based VLAN; | |
| QinQ and VLAN translation; | |
| IGMP snooping v1/v2/v3, IGMP proxy, MVR; | |
| DHCP client/sever/relay | |
| LACP for port bandwdith extension, load balance; | |
| STP/RSTP/MSTP for ring protection; | |
| ERPS with protection switching time <20ms; | |
| One key ring configuration for STP/RSTP/ERPS; | |
| Loopback detection and loopback test; | |
| 8-queue QoS with SP/WRR scheduling policy; | |
| Rate limitation and traffic shapping; | |
| DLF/multicast/broadcast limitation; | |
| MAC/VLAN/IP/TCP/UDP port/ToS based ACL | |
| Dynamic MAC learning and static MAC configuration; | |
| MAC addresss learning enable/disable per port; | |
| MAC limitation per port; | |
| Fiber RDI Remote Defect Indication) alarm; | |
| Dying Gasp remote equipment fail alarm; | |
| 801.2x, RADIUS, TACACS+ | |
| HTTPS, SSH; | |
| Port Mirror; | |
| RMON group 1, 2, 3, 9; | |
| SNMP v1/v2c/v3; | |
| Online upgrade and dual-Image firmware; | |
| Configuration backup and restore; | |
| Console and telnet for CLI management; | |
| Web management; | |
| Interface | Console Ports: RS-232(RJ45) Downlink Gigabit Ethernet ports: 20 |
| 10/100/1000Base-T (M12 female, 8-Pin X-Coded), the first 16 ports support PoE | |
| Gigabit Ethernet Ports: 4 10/100/1000Base-T (M12 female, 8-Pin X-Coded), bypass | |
| LED Indicator | Power LED: PWR |
| System LED: SYS | |
| Interface LED: Link & ACT | |
| Power | Power Input Voltage: 110VDC(70~160VDC) |
| Power Connector: 3-Pin Wago 5.0mm | |
| Full load power consumption: < 150W | |
| Overload Protection: Support | |
| Reverse Connection Protection: Support | |
| PoE Function | IEEE 802.3.af : 15.4W per port |
| IEEE 802.3.at: 30W per port | |
| Physical Characteristics | Housing: Metal, fanless, Protection Degree: IP40 Rated |
| Dimensions : 430mm*88mm*230mm(W*H*D) | |
| Weight: 5.2kg | |
| Mounting: Reckmount or desktop mount | |
| Mechanics | IEC60068-2-6 (Vibration) |
| IEC60068-2-27 (Shock) | |
| IEC60068-2-32 (Free Fall) | |
| MTBF | 360,000 hrs |
| Industrial Standard | EMI: |
| FCC CFR47 Part 15, | |
| EN55022/CISPR22, Class A | |
| EMS: | |
| IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) | |
| IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) | |
| IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV | |
| IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV | |
| IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) | |
| IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) | |
| Warranty | 3 years |
| Environmental | Operating Temperature: -40 to 85°C |
| Storage Temperature: -45 to 85°C | |
| Relative Humidity: 5 to 95% (non-condensing) |
